Skip to content

Independent appliance error-code reference

Find Appliance Error Codes and Understand What to Do Next.

Search washing machine, refrigerator, dishwasher, and air conditioner error codes with model-specific explanations and safe troubleshooting guidance.

  • Meanings sourced from manufacturer documentation
  • Clear labels when a result is provisional
  • Safety warnings before any check
Illustration of a washing machine, refrigerator and dishwasher with a diagnostic display 3°C 4C E15 DIAGNOSIS SAFE CHECK

Appliance Error Code Finder

21 reviewed entries · 3 brands with verified codes · see coverage

Type the code exactly as shown. Letter case and extra spaces don’t matter, but letters and numbers that look alike (O and 0, I and 1) are treated as different. Never enter your serial number.

Try:

Advanced Error Code Finder

Your diagnostic result

Edit search

Search a code above to see its verified meaning, safe checks and when to call a technician.

Results show the selected appliance, brand, model and code, the documented meaning, likely affected system, symptoms, causes, safe checks, manufacturer steps, safety precautions, when professional repair is needed, the official support link, sources and the date we last verified the guidance.

Don’t have a code? Describe the problem

We match your words against verified entries only. You will get possible codes to compare with your display — not a diagnosis.

How to read a result

  • Verified for your model — an editor linked your exact model to this definition from official documentation.
  • Provisional — manufacturer guidance for the brand or a model family; confirm with your model’s manual.
  • More than one meaning — the code differs between families (e.g. front-load vs top-load). Choose the one that fits.
  • Not verified for your model — documented for other models only; we show no diagnosis.
  • No verified match — we will not guess. You get safe next steps and the official support link.

Guided Troubleshooting Assistant

Answer a few questions. We’ll tell you what is safe to check.

Every session starts with a hazard check. Questions then follow decision trees written from the manufacturer’s own troubleshooting guidance for that code. Each path ends in one of four outcomes.

Safe user checkAn external, owner-level step the manufacturer publishes.
Stop using the applianceA hazard is present. Secure power and water first.
Professional service requiredThe manufacturer directs you to service.
Insufficient informationWe need your model or manual before advising.

Before you start, always check:

  • Is the appliance powering on, and does the display show a code?
  • Is water entering — and draining — as it should?
  • Are there unusual sounds, smells, heat or leaks?
  • Does the error appear immediately, or part-way through a cycle?

The assistant never asks you to bypass safety switches, open panels or work on live electrical parts.

Browse by appliance

Choose an appliance to see its verified error codes

Select a category to list every reviewed code for it, then narrow by brand. Categories without reviewed codes say so — we would rather show nothing than guess.

Browse by brand

Manufacturers and our database coverage

Coverage shows how many reviewed entries we hold for each manufacturer and appliance type. “Not yet reviewed” means we have not published any codes for that brand — use the manufacturer’s own support site.

Electrolux

Not yet reviewed

No codes published. We only add a brand’s codes after checking them against its official documentation.

GE Appliances

Not yet reviewed

No codes published. We only add a brand’s codes after checking them against its official documentation.

Haier

Not yet reviewed

No codes published. We only add a brand’s codes after checking them against its official documentation.

Midea

Not yet reviewed

No codes published. We only add a brand’s codes after checking them against its official documentation.

Whirlpool

Not yet reviewed

No codes published. We only add a brand’s codes after checking them against its official documentation.

Brand names are shown as text only. FixCodeHub does not use manufacturer logos and is not affiliated with any manufacturer.

Washing machine error guide

What washing machine errors usually mean

Most washer codes fall into a handful of systems: water in, water out, the door lock, balance during spin, heating and sensors. The exact code for each differs by manufacturer and often by model, so use this guide to understand the system — then confirm your code in the finder.

  1. Inlet hose & mesh filter

    Where water enters. Kinks, a closed tap, low pressure or a blocked mesh filter at the hose connection are the usual reasons for “not filling” codes. Owners can open the tap, straighten the hose and — with the tap off and the washer unplugged — clean the mesh filter if the manual shows how.

  2. Detergent drawer

    A clogged drawer can slow water flow and leave residue. Too much detergent causes over-sudsing, which some machines report as a drain or suds code.

  3. Door, gasket & lock

    The washer will not run until the door is shut and locked. Laundry caught in the gasket or an over-full drum are common causes. Never force or bypass a door lock.

  4. Drum & load balance

    Unbalanced-load codes appear when items bunch to one side and the machine cannot spin safely. Redistribute the load; persistent problems with normal loads need a technician.

  5. Drain / pump filter

    On most front-loaders, behind a small flap at the bottom. Coins, lint and hair here are a top cause of drain errors. Unplug first, let hot water cool, and expect water to come out.

  6. Drain hose & standpipe

    A pinched, blocked or frozen hose, or a hose fitted at the wrong height, stops draining or makes water siphon out. Follow the hose-height diagram in your manual.

  7. Levelling feet

    An unlevel machine vibrates more and can trigger balance codes. Some manufacturers also list levelling as a drain-error check.

Water inlet problems (not filling)

The machine measures how quickly the drum fills. If the water level does not rise in the expected time, it stops and shows a fill or water-supply code.

Typical signs

  • Humming with no water entering
  • Code within the first minutes of a cycle
  • Very slow filling

Routine owner checks

  • Open the supply tap fully
  • Straighten kinked hoses
  • Clean the inlet mesh filter as the manual shows (tap off, unplugged)
  • Check for frozen pipes in cold spaces

Leave to a technician

  • Inlet valve replacement
  • Pressure switch or wiring faults
Drainage problems

If water cannot be pumped out within a set time, the washer halts before spinning. Blockages are far more common than pump failure.

Typical signs

  • Water left in the drum
  • Door stays locked after the cycle
  • Clothes very wet

Routine owner checks

  • Unkink the drain hose
  • Clean the drain/pump filter if your model has one
  • Check the household drain is not blocked
  • Use the right amount of HE detergent

Leave to a technician

  • Drain pump replacement
  • Internal hose blockages
Door-lock issues

Front-loaders lock the door before filling and keep it locked while water or heat is present. Codes appear when the door is open, not fully latched, or the lock does not engage.

Typical signs

  • Cycle will not start
  • Clicking without starting
  • Door will not open after a cycle (often water still inside)

Routine owner checks

  • Clear laundry from the gasket and close firmly
  • Do one power reset if the manufacturer suggests it

Leave to a technician

  • Lock or latch replacement
  • Never bypass the lock — it prevents the door opening on a spinning drum or hot water
Excessive vibration and unbalanced loads

The controller senses imbalance during spin and either redistributes the load, spins slower, or stops with a balance code.

Typical signs

  • Loud banging or walking
  • Spin keeps restarting
  • Code with single bulky items

Routine owner checks

  • Spread the load evenly; mix large and small items
  • Level the machine using its feet
  • Check transit bolts were removed after installation (see installation manual)

Leave to a technician

  • Worn suspension, shock absorbers or bearings
Temperature and heating errors

A thermistor measures water temperature and a heater warms it. Errors appear if the water does not heat, overheats, or the sensor reads out of range.

Typical signs

  • Cold washes on hot programmes
  • Cycle stops part-way

Routine owner checks

  • Do one power reset if the manufacturer lists it
  • Note whether the code returns on a cold programme

Leave to a technician

  • Heater, thermistor and wiring — all involve mains voltage
Sensor-related alerts

Water-level, motor-speed, leak and suds sensors protect the machine. Some alerts are reminders (for example, tub-clean prompts); others mean a component has failed.

Typical signs

  • Code with no obvious water or door problem
  • Reminder icons that clear after maintenance

Routine owner checks

  • Look the code up for your exact model
  • Run maintenance cycles when prompted

Leave to a technician

  • Any repeat of a leak or electrical sensor code

Dishwasher error guide

Dishwasher codes: routine checks vs. technician jobs

Dishwashers watch water in, water out, temperature, the door and — on many models — water in the base. Filter and hose problems are often owner-fixable. Leak-protection and heating codes usually are not.

Usually routine

  • Cleaning a blocked filter
  • Straightening a visible kinked hose
  • Opening the water tap fully
  • Clearing items blocking the spray arms
  • Closing the door properly

Call a technician

  • Water-protection / leak codes (water in the base)
  • Heater and temperature-sensor faults
  • Pump, valve or flow-meter faults
  • Anything needing the kick-plate or panels removed
  • Any burning smell or tripped electrics
Water inlet problems

The dishwasher expects a set volume of water within a set time. A closed tap, kinked inlet hose, blocked inlet filter or low pressure can trigger fill codes; some brands monitor flow with a meter.

Routine owner checks

  • Check the tap under the sink is fully open
  • Look for kinks in the visible part of the hose

Leave to a technician

  • Inlet valve or flow-meter faults
  • Aqua-stop hose replacement where required by the manufacturer
Drainage issues and blocked filters

Food debris collects in the filter and the pump area. A blocked filter, kinked drain hose, blocked sink trap or a new waste-disposer plug can all prevent draining.

Typical signs

  • Standing water in the tub
  • Gritty dishes
  • Bad smells

Routine owner checks

  • Disconnect power, let water cool, then clean the filter per manual
  • Check the sink drain is clear

Leave to a technician

  • Drain pump faults
  • Hoses behind panels
Leak detection and water-protection systems

Many dishwashers have a tray and float switch in the base. If water reaches it, the machine stops filling and may run the drain pump to protect your floor. The water came from somewhere inside — finding it is a technician job.

Typical signs

  • Drain pump runs continuously
  • Machine will not start
  • Water on the floor

Routine owner checks

  • Close the water tap and switch off
  • Keep away from electrics if water is near them

Leave to a technician

  • Locating and fixing the leak
  • Do not tilt the machine to empty the base unless the manufacturer says so
Heating-related errors

Dishwashers heat water for cleaning and drying. Codes appear if the water does not reach temperature or the sensor reads abnormally.

Routine owner checks

  • Do one power reset if the manufacturer suggests it

Leave to a technician

  • Heater, heat pump, thermistor and wiring repairs
Door and latch problems

The cycle will not start, or will pause, if the door switch does not detect a closed door. Racks, utensils or a misaligned latch can stop it closing fully.

Routine owner checks

  • Push racks fully in and check nothing protrudes
  • Close the door firmly until it clicks

Leave to a technician

  • Latch or door-switch replacement
  • Door spring or hinge repairs

Refrigerator & freezer error guide

Fridge and freezer alerts — and keeping food safe

Cooling appliances report temperature, door, fan, defrost and sensor problems. Many alerts resolve with door and airflow checks or a natural defrost. Anything involving the sealed refrigerant system, the compressor or wiring is strictly for qualified technicians.

Food safety while a fridge is faulty

  • Keep doors closed to hold the cold in until you have a plan.
  • Move perishable food to another fridge or a cooler with ice packs before any defrost.
  • Use an appliance thermometer. Follow your local food-safety authority’s guidance on how long chilled and frozen food can stay out of safe temperatures — when in doubt, throw it out.
Temperature alerts

A high-temperature alarm usually follows a door left open, a large load of warm food, a power cut, or poor airflow. If temperatures do not recover, a cooling fault is likely.

Routine owner checks

  • Check the door seals close fully all round
  • Leave space around the vents inside; do not overpack
  • Make sure there is ventilation clearance around the cabinet as the manual specifies

Leave to a technician

  • Temperatures do not recover within the time your manual states
Door-open warnings

A chime or icon after a set time with the door open. Persistent warnings with the door shut can mean a misaligned door, a worn gasket, or a faulty door switch.

Routine owner checks

  • Check shelves or bins are not stopping the door closing
  • Clean the gasket with mild soapy water

Leave to a technician

  • Door switch or hinge adjustment beyond the manual’s guidance
Cooling problems

Warm fridge but cold freezer often points to airflow or defrost problems; both warm can mean a compressor or sealed-system fault.

Routine owner checks

  • Check settings were not changed
  • Vacuum accessible condenser coils only if the manual says owners may

Leave to a technician

  • Refrigerant leaks, compressor, start relay — sealed-system work requires certified technicians
Fan-related faults

Evaporator fans move cold air between compartments. Ice build-up around a fan is a common cause of fan codes; some manufacturers advise a full natural defrost.

Routine owner checks

  • Natural defrost only when the manufacturer recommends it: unplug, doors open, towels down
  • Never use heaters, hair dryers or sharp tools on ice

Leave to a technician

  • Fan motor replacement
Defrost-related issues

Frost-free appliances run automatic defrost cycles. A failing heater, sensor or timer lets ice build on the evaporator, blocking airflow.

Routine owner checks

  • Check drain holes inside are not frozen or blocked if the manual shows how

Leave to a technician

  • Defrost heater, thermostat or control board
Sensor errors

Thermistors in each compartment report temperatures to the control board. Sensor codes usually require a part replacement.

Routine owner checks

  • Note the exact code and contact support

Leave to a technician

  • Sensor and control-board diagnosis

Electrical safety: unplug before cleaning inside, keep water away from controls and plugs, and never pierce or cut refrigerant tubing.

Air conditioner error guide

Air conditioner codes: what owners can safely do

Split and window units report filter reminders, defrost status, sensor faults, drainage problems, protection trips and indoor–outdoor communication errors. Only a few are owner jobs.

Air conditioner problem types and who should handle them
Type of alertWhat it usually meansAppropriate for ownersQualified professional
Filter-maintenance alertDust on the indoor filter is restricting airflow.Switch off, clean or replace the filter as the user manual shows, reset the indicator.—
Drainage problemCondensate is not draining; water may drip indoors.Switch off, check the external drain hose end is not blocked or kinked.Drain pump, internal tray or pipe clearing.
Temperature sensorA room or coil thermistor reads out of range or is disconnected.Note the code; one power cycle if the manufacturer suggests it.Sensor replacement.
Communication errorIndoor and outdoor units are not exchanging signals.Note the code; check whether a power cut just occurred.Interconnecting cable and terminal checks (mains voltage).
Cooling failureAir blows but is not cold; can be airflow, refrigerant or compressor related.Check mode and set temperature, clean the filter, keep the outdoor unit clear of debris.Refrigerant charge, leaks, compressor, capacitors.
Overheating / high-pressure protectionThe unit shut down to protect itself — often blocked airflow at the outdoor unit or a fault.Make sure nothing blocks the outdoor unit; leave it off if it repeats.Diagnosis of fans, coils, pressures.
Electrical protectionOver-current, voltage or breaker trips.Do not reset repeatedly. Switch off at the isolator if safe.All wiring, boards and capacitors.

Refrigerant, wiring, capacitor and internal electrical work must be done by qualified professionals. Capacitors can hold a dangerous charge after power is off, and refrigerant handling is regulated in many countries.

Interactive troubleshooting flowcharts

Follow the decision tree step by step

Each flowchart is built from the manufacturer’s published troubleshooting for that code. Click an answer to follow its branch. A full text version sits under every chart.

Text version of this flowchart

Is the water tap feeding the washer turned fully open?

  • No / not sure →

    Safe user check: Open the tap fully and retry Turn the supply tap fully open, switch the washer off and on again, and restart the cycle.

  • Yes, fully open →

    Is the inlet hose behind the washer kinked, bent or squashed?

    • Yes →

      Safe user check: Straighten the hose Ease the washer forward carefully, straighten the hose so water can flow, then retry.

    • No →

      Have you cleaned the inlet hose mesh filter (tap off, washer unplugged)?

      • Not yet →

        Safe user check: Clean the inlet mesh filter Turn off the tap and unplug the washer. Unscrew the hose at the washer, remove and rinse the mesh filter, refit it, reconnect the hose, turn the tap on and check for leaks. Then switch on and retry.

      • Yes, already clean →

        Have you cleaned the detergent drawer and checked the drain hose height against your manual?

        • Not yet →

          Safe user check: Clean the drawer and check the drain hose Remove and rinse the detergent drawer. Make sure the drain hose is positioned at the height your manual shows, so water does not siphon out. Retry the cycle.

        • Yes, and the code still appears →

          Professional service required: Contact the manufacturer or an authorised technician The manufacturer’s own checks have not cleared the code. Stop troubleshooting and arrange service. Tell them the exact code, model number and what you already checked.

Based on: Samsung US – Washing machine information and error codes · Samsung India – How to resolve 4C or 5C · verified November 20, 2026

Severity & safety guide

How serious is my error code?

We assign severity per code from what the manufacturer tells owners to do for that code, appliance and model family — never from a universal scale. The same characters can be a reminder on one machine and a fault on another.

Stop now — whatever the code says — if you notice:

Smoke or burning smellSwitch off at the wall or breaker if safe. If there is fire, leave and call emergency services.
Gas smellDo not touch switches or plugs. Leave, then call your gas emergency line from outside.
Overheating or sparksHot plug, socket or cable, scorch marks or sparking — isolate power at the breaker if safe.
Exposed electrical partsDamaged cords, open panels or visible wiring — do not use.
Active water leakClose the water tap. Do not touch electrics while standing in water — use the breaker if you can reach it dry.

About resets: One reset is fine where the manufacturer suggests it. Repeated resets can hide a serious fault — if the code returns, stop and contact support.

  1. Informational alert

    A status message or reminder (for example “defrost in progress” or “child lock on”). Nothing is broken.

    3 entries in our database

  2. Routine maintenance

    The manufacturer asks for a care task such as cleaning a filter or running a cleaning cycle.

    2 entries in our database

  3. Limited safe troubleshooting

    A short list of external checks is published for owners — taps, hoses, filters, loading. Stop if the code persists.

    10 entries in our database

  4. Stop-use warning

    Possible leak, overfill or electrical risk. Stop using it, secure water and power, then arrange service.

    2 entries in our database

  5. Professional assistance required

    The manufacturer directs owners to authorised service. Do not attempt repairs.

    4 entries in our database

Your observations matter too: a “limited troubleshooting” code becomes a stop-use situation the moment you see water near electrics or smell burning.

Repair or replace?

Repair-or-replace decision helper

Enter your own figures from a written quote and a replacement price. The helper compares them using the assumptions shown — it is a budgeting aid, not a technical diagnosis.

Warranty status
Assumptions used (transparent)
  • Lifespan defaults are rough planning figures, not manufacturer data. Real life depends on model, usage, water hardness and maintenance — change the value to suit.
  • Cost per remaining year of the repaired appliance = repair quote ÷ remaining expected years (minimum 1).
  • Cost per year of a new appliance = replacement cost ÷ expected lifespan.
  • “50% rule”: a repair above half the replacement price on an appliance past half its expected life is flagged.
  • Two or more recent repairs are flagged as a reliability concern.
  • Energy efficiency, environmental impact and parts availability are not modelled — consider them too.

Maintenance guides

Prevent errors before they happen

Simple care tasks prevent many of the most common codes. Your manufacturer’s manual is the authority for your model; these are the owner-level tasks most manuals include. We do not publish disassembly procedures.

Washing machine care

Monthly to quarterly

  • Run the manufacturer’s drum/tub-clean cycle when prompted or about monthly.
  • Leave the door and detergent drawer ajar after washing so the gasket dries.
  • Wipe the door gasket folds; remove hair, lint and coins.
  • Clean the drain/pump filter as the manual shows (unplugged, towels ready).
  • Check inlet hoses for bulges or cracks; some manufacturers suggest cleaning the inlet mesh filter twice a year.
  • Use HE detergent in the dose the manual recommends.

Dishwasher filter maintenance

Weekly to monthly

  • Scrape plates but don’t rinse excessively — follow your manual’s loading advice.
  • Remove and rinse the filter assembly as shown in the manual; refit it fully locked.
  • Check spray arms spin freely and holes are clear.
  • Top up rinse aid and, where fitted, softener salt.
  • Run a cleaning programme or approved machine cleaner periodically.

Refrigerator cleaning

Monthly; coils yearly if accessible

  • Unplug or switch off before cleaning inside; use mild soapy water, not solvents.
  • Clean door gaskets and check they seal all round.
  • Keep vents inside clear — don’t overpack.
  • Replace water filters on the schedule in the manual.
  • Vacuum accessible condenser coils only if the manual says owners may.

Air conditioner filter maintenance

Every 2–4 weeks in heavy use

  • Switch off before opening the front panel.
  • Remove filters as the user manual shows; vacuum or rinse as directed and dry fully.
  • Reset the filter indicator if your unit has one.
  • Keep the outdoor unit clear of leaves and debris.
  • Book professional servicing for coils, drains and refrigerant checks.

Dryer lint removal

Every load

  • Empty the lint filter before or after every load — lint build-up is a fire risk.
  • Wash the lint screen occasionally if residue builds up (dry fully before refitting).
  • Condenser dryers: clean the condenser as the manual shows. Heat-pump dryers: clean all filters each cycle.
  • Vented dryers: have the duct inspected and cleaned; keep it short and kink-free.
  • Never run a dryer without its lint filter.

General appliance inspection

Every few months

  • Look for damaged cords, loose plugs and scorch marks — stop using if found.
  • Avoid extension leads for large appliances unless the manual allows it.
  • Check under appliances for drips or damp.
  • Keep manuals and model numbers somewhere you can find them.
  • Register products with the manufacturer for recall notices.

Model number guide

Find your appliance model number

The model number tells you — and the manufacturer — exactly which design, components and code list your appliance uses. It is printed on the rating label (also called the data plate or serial plate).

Front-loaders: around the door opening or inside the filter/service flap. Top-loaders: under the lid or on the back panel.

Reading the label

EXAMPLE BRAND — fictional label

MODELXW-8100-A/EU← enter this

SERIAL•••••••••••never needed here

220–240V ~ 50Hz2000W

  • Look for “Model”, “Model No.”, “MOD”, “Type” or “E-Nr” (European brands).
  • Copy every character, including suffixes after a slash or dash — they often identify the market and the code list.
  • Can’t reach the label? The model is usually on your receipt, the manual cover, the box or the manufacturer’s app.

Model number vs serial number

The model number identifies the product design shared by thousands of units. The serial number identifies your single unit and its production date — manufacturers use it for warranty and recalls. FixCodeHub never asks for your serial number; share it only with the manufacturer or an authorised repairer.

Repair cost information

What drives appliance repair costs?

We do not publish price lists: costs vary widely by country, city, brand and part availability, and change often. Instead, here is what makes a repair cheap or expensive — and a calculator for the figures you are quoted.

Parts

Genuine parts for newer or premium models tend to cost more; control boards and compressors are usually the most expensive. Ask whether a quote uses genuine or compatible parts.

Labour

Most technicians charge a call-out or diagnostic fee plus time. Built-in appliances take longer to remove and refit.

Appliance age

Older models may have discontinued parts, longer lead times, and more chance of a second fault soon after.

Warranty

Manufacturer warranties often cover parts and labour; extended plans may have excesses. DIY repair can affect cover — check first.

Location

Labour rates and call-out distances vary by region; rural areas can carry higher travel charges.

Repair complexity

A filter or hose is quick; sealed-system work on a fridge or AC needs certified technicians, specialist equipment and more time.

Repair estimate calculator (your figures)

Tip: ask for a written quote that separates parts, labour and call-out, and whether the call-out fee is deducted if you go ahead.

How error codes work

Understanding appliance error codes

A plain-language explanation of what the letters and numbers on your display are, and why we handle them so carefully.

What an error code represents

Modern appliances are run by a control board that constantly reads sensors: water-level switches, flow meters, temperature thermistors, door locks, motor-speed sensors and leak detectors. When a reading falls outside the range the designers expect — the drum has not filled after several minutes, say — the board stops the cycle to protect the appliance and your home, and shows a short code that points to the system involved.

A code tells you which check failed, not always why. “Not filling” can be a closed tap or a failed valve; the code is the same. That is why good guidance starts with the simple external causes and stops at the point where a technician is needed.

Why different brands use different codes

There is no industry standard for appliance codes. Each manufacturer designs its own scheme, and many change it as products evolve. The same two characters can mean a leak on one brand and a communication fault on another. Even within one brand, front-loaders and top-loaders, or models sold in different regions, can use different lists.

Why model identification matters

Your model number links your appliance to its own manual and code table. Our finder labels a result “Verified for your model” only when an editor has linked that model to the definition from official documentation. Otherwise you will see a provisional label and the scope the source covers.

Warnings vs failures

Some codes are reminders or status messages — a clean-filter prompt, child lock, or defrost in progress. Others mean the appliance detected a condition it cannot handle, such as water in the base or a failed sensor. Our severity labels follow the manufacturer’s own instruction for each code.

Why a reset may not fix it

Switching off and on clears the code from memory and can resolve a one-off glitch. If the underlying condition is still there — a blocked filter, a leak, an overheating part — the code returns. Repeatedly resetting can mask a serious fault and, for leak or electrical codes, put your home at risk.

When to contact manufacturer support

Contact the manufacturer when the code persists after the documented owner checks, when its guidance says service is required, when the appliance is under warranty, or when you cannot find the code for your model. Have the model number, the exact code and a list of what you already tried.

Why safe troubleshooting matters

Appliances combine mains electricity, water, heat, moving parts and — in fridges and air conditioners — pressurised refrigerant. Owner checks should stay outside the casing: taps, hoses, filters, loading, settings. Anything beyond that belongs with trained technicians who have the right tools and isolation procedures.

How we build this database

We start from official manufacturer support pages and manuals, rewrite the guidance in our own words, record the source and date, and publish only after review. Similar-looking codes are never merged unless the manufacturer lists them together. A smaller verified database is more useful than a large unreliable one.

FAQs

Frequently asked questions

What does my washing machine error code mean?

It depends on the manufacturer and often on the model. Enter the code, brand and appliance type in the Error Code Finder above. We only show a meaning when it is documented by that manufacturer, and we tell you if we could not confirm it for your exact model. If nothing matches, the owner’s manual for your model number is the most reliable source.

Why is my dishwasher showing an error?

Dishwashers stop and show a code when a sensor reports something outside normal limits — commonly water not coming in, water not draining, a blocked filter, a heating problem, or water detected in the base (a leak). Some of these allow simple owner checks such as cleaning the filter; others, like leak-protection codes, mean you should close the water tap, switch off and call the manufacturer.

How do I find my appliance model number?

Look for the rating label (also called the data plate or serial plate). It is usually inside the door frame or on the door edge for washers and dishwashers, on an inside wall of a refrigerator, behind the filter or on the side of an indoor air-conditioner unit, and on the back or side of most appliances. The model number is often labelled “Model”, “MOD”, “Type” or “E-Nr”. See the model-number guide on this page for diagrams.

Are error codes the same across brands?

No. Different manufacturers use different codes, and the same characters can mean completely different things. For example, “AE” on one brand’s washer is a leak alarm, while another brand uses “AE” for a communication fault. Even within one brand, codes can change between model families and regions. That is why our finder asks for the brand, appliance type and, ideally, the model.

Can I safely reset my appliance?

A single power reset is a normal step that many manufacturers include, and it can clear a temporary glitch. It does not fix the underlying cause. If the same code returns, stop resetting it — repeated resets can hide a real fault such as a leak, overheating or an electrical problem. Never reset or keep using an appliance that smells of burning, smokes, sparks, leaks onto the floor or has water near electrics.

When should I stop using a faulty appliance?

Stop immediately and switch off at the wall or breaker (only if safe) if you notice smoke, a burning or gas smell, sparks, a hot plug or cable, exposed internal parts, or water leaking — especially near sockets or cables. Also stop if the manufacturer’s guidance for your code says to stop, or if the code keeps coming back after the documented owner checks.

Can a clogged filter cause an error?

Yes, very often. Blocked drain or pump filters on washers and dishwashers commonly trigger drain errors, blocked inlet mesh filters can cause “not filling” errors, and a dusty air-conditioner filter can trigger a clean-filter reminder or weaker cooling. Clean filters only the way your manual describes and with the appliance switched off and unplugged.

Where can I find the official user manual?

Manufacturers publish manuals on their own support websites, usually under “Manuals & downloads” or “Owner support”. Search with your full model number, including any suffix, because manuals are model-specific. Each result in our finder links to the manufacturer’s official support page for that code.

How can I check whether an appliance is under warranty?

Check your purchase receipt and the warranty card or terms in the manual, then confirm on the manufacturer’s support site — many let you register the product or check coverage using the model and serial number. Do not share your serial number with third-party sites; FixCodeHub never asks for it. Avoid DIY repairs if you are under warranty, because unauthorised work can affect cover.

When should I contact a technician?

Contact the manufacturer or a qualified technician when the code persists after the owner-level checks, when the manufacturer says the code needs service, or whenever the fix would involve opening panels, wiring, gas, refrigerant, capacitors, heating elements or the sealed cooling system. Those jobs carry risks of electric shock, fire, gas leaks and injury and are not suitable for DIY.

Error code details